1
/
of
1
Power Point Safety Cover
Power Point Safety Cover
Regular price
$17.99 AUD
Regular price
Sale price
$17.99 AUD
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Low stock: 10 left
Couldn't load pickup availability
Put your child’s safety first, with Micky Ha Ha’s Power Point Safety Cover, which prevents electrocutions, by stopping children from pulling out plugs, or turning switches on or off. It’s the only product on the market that conveniently allows plugs to remain installed when in use. The cover will also cover some smaller wall plugpack chargers.
Two child-resistant catches and a rounded, all-clear design will provide piece of mind to parents. The universal design is compatible with all Australian standard-size single or double power points.
The Micky Ha Ha Power Point Safety Cover is also ideal for workshop areas where dust, dirt and sparks are a problem. The safety cover protects the power point and prevents accidental unplugging.
Install via the supplied adhesive tape or permanently with screws. Proudly Australian made and owned.
Use
The two piece Micky Ha Ha Power Point Safety Cover fits over all Australian standard size single and double power points. Outlets in the cover exist to enable power cords to remain installed when in use. To remove the cover, hold down the tabs on both sides of the base to lever out. Simply click back into place to replace the cover.
Installation
Two self-adhesive tape strips are included that cure over 24-hours, or alternatively the cover can be screwed into the wall with screws. We recommend screwing the covers to the wall as the most sound installation method. If using the self-adhesive strips it is important to let the tape cure before use.
To attach, simply peel off the outer tape cover and firmly press onto a dry, flat surface (not suitable for use on brick walls). For more permanent installation, insert screws into the holes in the top and bottom of the base. Once inserted, tighten with a screwdriver or with the use of an electrical drill. If unsure, contact a licenced electrician.
Cleaning
A damp cloth should be used to clean your Micky Ha Ha Power Point Safety Cover.
Do not use solvent-based cleaners, abrasive cleaners or harsh chemicals, as this could cause dis-coloration and damage the surface.
